SnoMaster SM-26
26Kg/24Hr Plumbed-In Bullet Type Ice-Maker - Stainless Steel

For the serious home entertainer, upgrade your ice game with the SM-26 Plumbed-in Ice-Maker. With the ability to produce up to 26kg of bullet-shaped ice in 24 hours, this sleek stainless steel appliance ensures that the ice keeps flowing, without the need for constant water top-ups. It’s more than just an ice-maker; it’s a seamless integration into your lifestyle, keeping your drinks chilled and your parties going.

Product Features:

ON/OFF Switch
6Kg Ice Bin
Ice Full Sensor
Water Low Sensor
Disposable Water Filter Cartridge Included

Dimensions (mm) Unit: (H) 655 (L) 425 (W) 540
Dimensions (mm) Packaged: (H) 695 (L) 485 (W) 585
Storage Bin Volume: 6Kg
Rated Current: 1.1A
Net Weight: 33Kg
Ice Type: Bullet Ice
Ice Making Capacity: 26Kg/24h
Ice Bullet Size (mm): H 36, D 26
Voltage: 230V/50Hz
Total Input Power: 300W
Design Criteria: Engineered for the African climate.
Suggested Application Home Bar, Kitchen, B&B, Hotel,Café, Cocktail Bar, Office
Finishes: Black Gloss Stainless Steel

The ice-maker does not switch on

Check if the ice-maker is correctly switched on.
Check if there has not been loadshedding or a power cut.
Make sure you have followed the installation requirements correctly Water shortage indicator light is on
Check the water supply and if the inlet pipes are pinched or the water filter is blocked, if there are no obstructions restart the ice-maker.
Check if the water pressure is between 2 and 4 bar pressure.
Check if the water box nut is loose and tighten accordingly.
The water solenoid valve could be faulty.
The water level sensor is dirty and will need to be cleaned or replaced. Compressor doesn’t work
Check if the condenser fan is working.
Remove some ice. Ice full light might be on.
The compressor is faulty Compressor works, but no ice is being made
The refrigerant has leaked and will need to be re-gassed.
The gas solenoid valve will need to be replaced
. The appliance has a blockage and will need to be flushed and re-gassed.
Check if the condenser fan is working. Ice is not dropping or struggling to drop
Check if the ambient temperature is too low (lower than 10°C) or water temperature is too low (lower than 7°C)
Replace the gas solenoid valve.
The water/evaporator sensor is faulty.
The circulation pump is faulty and the ice is getting stuck together and not releasing

SnoMaster 26Kg Ice Maker Stainless Steel SM-26